The Best Ceramic Coating Installers in Parkland

CERAMIC COATING

Professional Ceramic Coating Car Detailing

If You Want Your Vehicle To Look Its Best For Years To Come, Then Our Ceramic Coating Service Is EXACTLY What You Need

The LEVEL 1 & 2 CERAMIC COATING Includes:
  • PRE-RINSE & FOAM BATH
  • DETAIL RIMS, TIRES, INNER FENDERS, and GAS CAP
  • DETAIL DOOR JAMBS AND SILLS
  • PAINT DECONTAMINATION USING IRON REMOVER, TAR REMOVER, AND CLAY BAR
  • TOWEL & BLOW DRY
  • APPLY WATER-BASED SILICONE OXIDE DRESSING TO TIRES
  • 1-STEP POLISH
    *If the paint is heavily scratched, a 2-Step Paint Correction will be needed.
  • APPLY CERAMIC COATING
    *Durable For 3+ Years With Proper Maintenance
Is A Ceramic Coating Worth It?

YES, Ceramic Coating your vehicle is 100% worth it, let me explain.

The benefits provided by this technology are unmatched by any other form of applicable protection.

Our ceramic coating offers 3+ years of protection that provides maximum resistance to heat, water, and the sun’s harmful UV rays. The resistant layer of coating left on the paint is highly hydrophobic making it difficult for water and other contaminants to sit on the surface.

With a highly hydrophobic surface, your vehicle tends to stay a lot cleaner than it would have without it. An added bonus to this is that it’ll also make it significantly easier to maintenance the exterior, keeping your paint factory new for a long time.

The process of applying a ceramic coating is both simple and tedious. We start by performing our decontamination wash to begin prepping the paint for correction.

In our decontamination wash step, we use a variety of products including a clay bar, iron remover, and tar remover. By using these products we are able to remove the rough layer of grime that is stuck within the pores of the paint, making it a smoother surface for the protection to bond to.

Depending on the condition of your paint, we will determine whether a 1 or 2-step correction is needed to remove as many defects as possible.

This must be done to level out the clear coat so that the ceramic coating can adhere correctly, and to also not leave behind any visible scratches sealed for years to come.

Once the surface is prepped and wiped down of any polishing oils, we will begin to apply the ceramic coating panel by panel ensuring that the coating is applied evenly with no high spots left behind.

The coating must cure at our shop for at least 12 hours to ensure that it doesn’t come in contact with any water during its curing process to prevent premature failure.

PRICING

CHOOSE YOUR VEHICLE

All prices shown below are subject to change depending on the condition of your vehicle. For a more accurate quote, please feel free to contact us!

LEVEL 1 CERAMIC COATING
$800
    LEVEL 2 CERAMIC COATING
    $1000
      LEVEL 1 CERAMIC COATING
      $1000
        LEVEL 2 CERAMIC COATING
        $1250
          LEVEL 1 CERAMIC COATING
          $1250
            LEVEL 2 CERAMIC COATING
            $1500
              Interested In Scheduling A CERAMIC COATING?

              PLATINUM is both a mobile and shop-based business located in between Coral Springs and Parkland, all services require a scheduled appointment. Before reaching out to schedule an appointment, please review all our service packages so that you are familiar with pricing and what is included. When you are ready to schedule you can fill out our appointment request form or call us, both of these can be found on our BOOK AN APPOINTMENT PAGE’.